1 Overview
2 Summary
- 2.1 Recommendations & Jiras (Optional)
3 Test Runs
4 Results
5 Resource utilization
- 5.1 CPU utilization
- 5.2 Memory utilization
6 Errors
7 Infrastructure
- 7.1 Methodology/Approach

Overview

The task at hand involves conducting performance tests on Check-in/Check-Out operations under two different conditions:

Test Run 1: Running without New Relic.
Test Run 2: Running with the New Relic monitoring tool enabled.
Test Run 3: Running with the New Relic monitoring tool enabled and changed JVM mod-oa parameter from -XX:MaxMetaspaceSize=128m to -XX:MaxMetaspaceSize=256m

These tests were performed using 20 virtual users to simulate the load on the system. The environment was used for these tests QCP1.

The primary goal of these tests is to assess whether the New Relic monitoring tool impacts the system’s performance.
Ticket: PERF-920: Test New Relic impact on FOLIOClosed

Summary

Test Run 1 (Without New Relic). Generate 3159 Check-out transactions and 2420 Check-in transactions. The error rate during the test was 0.04 %. Median Response time for CO = 960 seconds and median Response time for CI =640 seconds.

Test Run 2 (With New Relic). Generate 3180 Check-out transactions and 2381 Check-in transactions. The error rate during the test was 0.04 %. Median Response time for CO = 968 seconds and median Response time for CI = 594 seconds.
Test Run 3 (With New Relic + mod-oa(256m)). Generate 3212 Check-out transactions and 2402 Check-in transactions. The error rate during the test was 0.04 %. Median Response time for CO = 948 seconds and median Response time for CI = 588 seconds.

Conclusion. Two separate tests were conducted in order to determine the impact of enabling New Relic monitoring tool on the Check-in/Check-Out process. The aim of the test was to identify any significant variations in key performance metrics that could potentially be attributed to New Relic.

Comparative analysis of the key performance metrics obtained from both tests yielded the following insights:

Response Times: The median and 95th percentile values for response times exhibited similar trends across both test runs, indicating that New Relic did not add any noticeable overhead to the response times.
Error Rate: The error rates remained consistent in both test scenarios. This suggests that the integration of New Relic did not compromise the stability of the Check-in/Check-Out process.
CPU Usage: The slight variation in CPU usage within the tolerance limit of 5% between the test runs poses no significant concern and is well within acceptable boundaries.
Memory Usage: No changes in memory usage patterns were observed upon enabling New Relic, implying the tool has minimal if any, impact on the memory resources of the system.

In conclusion, the results of the tests demonstrate that utilizing the New Relic monitoring tool does not adversely affect the check-in/check-out process and the overall system performance remains unaffected, but after deployment of New RElic we observed high CPU consumption and OOM errors on mod-oa service.

After increasing mod-oa parameter from -XX:MaxMetaspaceSize=128m to -XX:MaxMetaspaceSize=256m memory CPU utilization decrease to 80%.

Recommendations & Jiras (Optional)

While the current tests provided insights into how New Relic impacts the CICO process, it's recommended for future analysis to cover a more extensive range of operations to fully evaluate the impact of New Relic on the system performance during data-import, data-export, or other workflows.
Investigate errors described in the Error section, high CPU consumption and OutOfMemoryError on mod-oa module

Test Runs

Test Run 1: Running without New Relic.
- Test setup: 20 Virtual users, 4000 seconds, 200 seconds of rump up period.
Test Run 2: Running with the New Relic monitoring tool enabled.
- Test setup: 20 Virtual users, 4000 seconds, 200 seconds of rump up period
Test Run 3: Running with the New Relic monitoring tool enabled and mod-oa(256m).
- Test setup: 20 Virtual users, 4000 seconds, 200 seconds of rump up period

Results

NAME	Test 1. Without New Relic		Test 2. With New Relic		Test 3. With New Relic + mod-oa(256m)
NAME	CO	CI	CO	CI	CO	CI
TTL REQ, COUNT	3159	2420	3180	2381	3212	2402
THRGHPT, REQ/SEC	1.585	1.214	1.594	1.193	1.638	1.239
ERRORS, COUNT	36	23	43	16	36	24
MIN, MS	24	39	25	46	28	35
MEDIAN, MS	959	640	968	594	947	588
PCT95, MS	1,226	759	1,247	740	1,150	682
MAX, MS	6,504	20,712	14,834	12,165	12,694	17,582

Resource utilization

CPU utilization

The slight variation in CPU usage within the tolerance limit of 5% between the test runs poses no significant concern and is well within acceptable boundaries.

Test Run 1:

Test Run 2:

Test Run 3:

Top 16 CPU-consuming services

Module	Avrg CPU Utlz (Test 1) %	Avrg CPU Utlz (Test 2)%	Avrg CPU Utlz (Test 3)%

Module	Avrg CPU Utlz (Test 1) %	Avrg CPU Utlz (Test 2)%	Avrg CPU Utlz (Test 3)%
mod-users-b	46.04	45.43	47
nginx-okapi	33.77	27.58	32
mod-configuration-b	29.59	27.53	31
mod-feesfines-b	27.13	27.68	27
okapi-b	25.76	30.62	28
mod-authtoken-b	22.81	19.87	17
mod-permissions-b	18.43	19.49	21
mod-consortia-b	20.87	22.13	20
mod-dcb-b	17.56	17.94	17.5
mod-audit-b	15.98	11.50	13.2
mod-inventory-b	14.23	15.14	14.4
mod-agreements-b	11.36	12.43	11.7
mod-pubsub-b	10.64	11.49	12.1
mod-notes-b	8	10.19	11
mod-calendar-b	9.69	9.31	9
pub-okapi	9.02	10.12	10

Memory utilization

Memory Usage: No changes in memory usage patterns were observed upon enabling New Relic. No memory leaks in any module.

Test Run 1:

Test Run 2:

Test 3:

Top Memory-consuming services

Module	Avrg Memory Utlz (Test 1) %	Avrg Memory Utlz (Test 2)%

Module	Avrg Memory Utlz (Test 1) %	Avrg Memory Utlz (Test 2)%
mod-data-export-b	-	104.04
mod-users-b	46.04	45.43
nginx-okapi	33.77	27.58
mod-configuration-b	29.59	27.53
mod-feesfines-b	27.13	27.68
okapi-b	25.76	30.62
mod-authtoken-b	22.81	19.87
mod-permissions-b	18.23	19.49
mod-consortia-b	20.87	-
mod-dcb-b	17.56	17.94
mod-audit-b	15.98	18.568
mod-inventory-b	14.23	15.14

Errors

After the deployment of New Relic on QCP1, two services were identified as having high CPU consumption: mod-oa-b and mod-data-export. These two services had new task definitions with new relic variables.

mod-oa was throwing error messages “OutOfMemoryError“

Infrastructure

PTF -environment qcp1

10 m6i.2xlarge EC2 instances located in US East (N. Virginia)us-east-1
2 database instances, writer/reader
NameMemory GIBvCPUsmax_connections
db.r6g.xlarge
32 GiB4 vCPUs2731
MSK tenant
- 4 m5.2xlarge brokers in 2 zones
- Apache Kafka version 2.8.0
- EBS storage volume per broker 300 GiB
- auto.create.topics.enable=true
- log.retention.minutes=480
- default.replication.factor=3

QCP1 modules

Module	Task Def. Revision	Module Version	Task Count	Mem Hard Limit	Mem Soft limit	CPU units	Xmx	MetaspaceSize	MaxMetaspaceSize

Module	Task Def. Revision	Module Version	Task Count	Mem Hard Limit	Mem Soft limit	CPU units	Xmx	MetaspaceSize	MaxMetaspaceSize
qcp1-pvt
mod-remote-storage	4	mod-remote-storage:3.2.0	2	4920	4472	1024	3960	512	512
mod-ncip	4	mod-ncip:1.14.4	2	1024	896	128	768	88	128
mod-finance-storage	4	mod-finance-storage:8.6.0	2	1024	896	1024	700	88	128
mod-agreements	4	mod-agreements:7.0.0	2	1592	1488	128	0	0	0
mod-ebsconet	4	mod-ebsconet:2.2.0	2	1248	1024	128	700	128	256
mod-organizations	4	mod-organizations:1.9.0	2	1024	896	128	700	88	128
mod-consortia	2	mod-consortia:1.1.0	2	3072	2048	128	2048	512	1024
edge-sip2	2	edge-sip2:3.2.0-SNAPSHOT.209	2	1024	896	128	768	88	128
mod-serials-management	4	mod-serials-management:1.0.0	2	2480	2312	128	1792	384	512
mod-settings	4	mod-settings:1.0.3	2	1024	896	200	768	88	128
mod-data-import	7	mod-data-import:3.1.0	1	2048	1844	256	1292	384	512
edge-dematic	4	edge-dematic:2.2.0	1	1024	896	128	768	88	128
mod-search	4	mod-search:3.2.0	2	2592	2480	2048	1440	512	1024
mod-inn-reach	2	mod-inn-reach:3.2.0-SNAPSHOT.86	2	3600	3240	1024	2880	512	1024
mod-tags	4	mod-tags:2.2.0	2	1024	896	128	768	88	128
edge-courses	4	edge-courses:1.4.0	2	1024	896	128	768	88	128
mod-authtoken	5	mod-authtoken:2.15.1	2	1440	1152	512	922	88	128
mod-inventory-update	4	mod-inventory-update:3.3.0	2	1024	896	128	768	88	128
mod-notify	4	mod-notify:3.2.0	2	1024	896	128	768	88	128
mod-configuration	4	mod-configuration:5.10.0	2	1024	896	128	768	88	128
mod-orders-storage	4	mod-orders-storage:13.7.0	2	1024	896	512	700	88	128
edge-caiasoft	4	edge-caiasoft:2.2.0	2	1024	896	128	768	88	128
mod-login-saml	4	mod-login-saml:2.8.0	2	1024	896	128	768	88	128
mod-erm-usage-harvester	4	mod-erm-usage-harvester:4.5.0	2	1024	896	128	768	88	128
mod-licenses	4	mod-licenses:6.0.0	2	2480	2312	128	1792	384	512
mod-gobi	4	mod-gobi:2.8.0	2	1024	896	128	700	88	128
mod-password-validator	4	mod-password-validator:3.2.0	2	1440	1298	128	768	384	512
mod-bulk-operations	4	mod-bulk-operations:2.0.0	2	3072	2600	1024	1536	384	512
mod-fqm-manager	4	mod-fqm-manager:2.0.1	2	3000	2600	128	2048	384	512
edge-dcb	4	edge-dcb:1.1.0	2	1024	896	128	768	88	128
mod-graphql	5	mod-graphql:1.12.1	2	1024	896	128	768	88	128
mod-finance	4	mod-finance:4.9.0	2	1024	896	128	700	88	128
mod-erm-usage	4	mod-erm-usage:4.7.0	2	1024	896	128	768	88	128
mod-batch-print	5	mod-batch-print:1.1.0	2	1024	896	128	768	88	128
mod-copycat	4	mod-copycat:1.6.0	2	1024	512	128	768	88	128
mod-lists	4	mod-lists:2.0.0	2	3000	2600	128	2048	384	512
mod-entities-links	5	mod-entities-links:3.0.0	2	2592	2480	400	1440	0	1024
mod-permissions	8	mod-permissions:6.5.0	2	1684	1544	512	1024	384	512
pub-edge	3	pub-edge:2023.06.14	2	1024	896	128	768	0	0
mod-orders	4	mod-orders:12.8.0	2	2048	1440	1024	1024	384	512
edge-patron	4	edge-patron:5.1.0	2	1024	896	256	768	88	128
edge-ncip	4	edge-ncip:1.9.2	2	1024	896	128	768	88	128
edge-inn-reach	2	edge-inn-reach:3.1.1-SNAPSHOT.45	2	1024	896	128	768	88	128
mod-users-bl	4	mod-users-bl:7.7.0	2	1440	1152	512	922	88	128
mod-oa	2	mod-oa:2.1.0-SNAPSHOT.62	2	1024	896	128	768	88	128
mod-inventory-storage	4	mod-inventory-storage:27.1.0	2	4096	3690	2048	3076	384	512
mod-invoice	5	mod-invoice:5.8.0	2	1440	1152	512	922	88	128
mod-user-import	4	mod-user-import:3.8.0	2	1024	896	128	768	88	128
mod-sender	5	mod-sender:1.12.0	2	1024	896	128	768	88	128
edge-oai-pmh	4	edge-oai-pmh:2.9.0	2	1512	1360	1024	1440	384	512
mod-data-export-worker	4	mod-data-export-worker:3.2.1	2	3072	2048	1024	2048	384	512
mod-rtac	4	mod-rtac:3.6.0	2	1024	896	128	768	88	128
mod-circulation-storage	4	mod-circulation-storage:17.2.0	2	2880	2592	1536	1814	384	512
mod-calendar	4	mod-calendar:3.1.0	2	1024	896	128	768	88	128
mod-source-record-storage	4	mod-source-record-storage:5.8.0	2	5600	5000	2048	3500	384	512
mod-event-config	4	mod-event-config:2.7.0	2	1024	896	128	768	88	128
mod-courses	4	mod-courses:1.4.10	2	1024	896	128	768	88	128
mod-circulation-item	4	mod-circulation-item:1.0.0	2	1024	896	128	0	0	0
mod-inventory	4	mod-inventory:20.2.0	2	2880	2592	1024	1814	384	512
mod-email	4	mod-email:1.17.0	2	1024	896	128	768	88	128
mod-pubsub	4	mod-pubsub:2.13.0	2	1536	1440	1024	922	384	512
mod-circulation	4	mod-circulation:24.2.0	2	2880	2592	1536	1814	384	512
mod-di-converter-storage	4	mod-di-converter-storage:2.2.0	2	1024	896	128	768	88	128
edge-rtac	4	edge-rtac:2.7.1	2	1024	896	128	768	88	128
edge-orders	4	edge-orders:3.0.0	2	1024	896	128	768	88	128
mod-users	5	mod-users:19.3.1	2	1024	896	128	768	88	128
mod-template-engine	4	mod-template-engine:1.20.0	2	1024	896	128	768	88	128
mod-patron-blocks	4	mod-patron-blocks:1.10.0	2	1024	896	1024	768	88	128
mod-audit	4	mod-audit:2.9.0	2	1024	896	128	768	88	128
edge-fqm	4	edge-fqm:2.0.0	2	1024	896	128	768	88	128
mod-source-record-manager	5	mod-source-record-manager:3.9.0-SNAPSHOT.330	2	5600	5000	2048	3500	384	512
nginx-edge	3	nginx-edge:2023.06.14	2	1024	896	128	0	0	0
mod-quick-marc	4	mod-quick-marc:5.1.0	1	2288	2176	128	1664	384	512
nginx-okapi	3	nginx-okapi:2023.06.14	2	1024	896	128	0	0	0
okapi-b	4	okapi:5.3.0	3	1684	1440	1024	922	384	512
mod-feesfines	4	mod-feesfines:19.1.0	2	1024	896	128	768	88	128
mod-invoice-storage	4	mod-invoice-storage:5.8.0	2	1872	1536	1024	1024	384	512
mod-dcb	5	mod-dcb:1.1.0	2	1024	896	128	768	88	128
mod-service-interaction	4	mod-service-interaction:4.0.1	2	2048	1844	256	1290	384	512
mod-data-export	11	mod-data-export:5.0.4	1	2048	1524	1024	0	0	0
mod-patron	4	mod-patron:6.1.0	2	1024	896	128	768	88	128
mod-oai-pmh	4	mod-oai-pmh:3.13.0	2	4096	3690	2048	3076	384	512
edge-connexion	4	edge-connexion:1.2.0	2	1024	896	128	768	88	128
mod-kb-ebsco-java	4	mod-kb-ebsco-java:4.0.0	2	1024	896	128	768	88	128
mod-notes	4	mod-notes:5.2.0	2	1024	896	128	952	384	512
mod-data-export-spring	4	mod-data-export-spring:3.2.0	1	2048	1844	256	1536	384	512
mod-organizations-storage	4	mod-organizations-storage:4.7.0	2	1024	896	128	700	88	128
mod-login	4	mod-login:7.11.0	2	1440	1298	1024	768	384	512
pub-okapi	3	pub-okapi:2023.06.14	2	1024	896	128	768	0	0
mod-eusage-reports	4	mod-eusage-reports:2.1.1	2	1024	896	128	768	88	128

Methodology/Approach

Step 1. Test Run 1 was executed from the carrier box with parameters described in the TEST RUN section.
Step 2. Deploy New Relic, and verify if it works.
Step 3. Test Run 2 was executed from the carrier box with parameters described in the TEST RUN section, with the same parameters as on the step 1.