| Table of Contents |
|---|
Introduction
Performance Testing is a software testing process used for testing the speed, response time, stability, reliability, scalability, and resource usage of a software application under a particular workload. The main purpose of performance testing is to identify and eliminate the performance bottlenecks in the software application.
Features and Functionality supported by a software system are not the only concern. A software application’s performance, like its response time, reliability, resource usage, and scalability, do matter. The goal of Performance Testing is not to find bugs but to eliminate performance bottlenecks.
...
- Performance acceptance criteria
- Test planning
- System modelling
- Test scripts development
- Test execution
- System tuning
- Test result reporting
PTLC
Performance acceptance criteria
This includes goals and constraints for throughput, response times and resource allocation. It is also necessary to identify project success criteria outside of these goals and constraints. Testers should be empowered to set performance criteria and goals because often the project specifications will not include a wide enough variety of performance benchmarks. Sometimes there may be none at all. When possible finding a similar application to compare to is a good way to set performance goals.
TBD NFRs/SLAs
Test planning
Test planning is particularly important for performance testing due to the need for the allocation of test environments, test data, tools and human resources. In addition, this is the activity in which the scope of performance testing is established. During test planning, risk identification and risk analysis activities are completed and relevant information is updated in any test planning documentation (e.g., test plan, level test plan). Just as test planning is revisited and modified as needed, so are risks, risk levels and risk status modified to reflect changes in risk conditions.
PTF Team backlog:
https://issuesfolio-org.folioatlassian.orgnet/secure/RapidBoard.jspa?rapidView=264&view=planning.nodetail&issueLimit=100
System modelling
Know your physical test environment, production environment and what testing tools are available. Understand the details of the hardware, software and network configurations used during testing before you begin the testing process. It will help testers create more efficient tests. It will also help identify possible challenges that testers may encounter during the performance testing procedures.
PROD Config
Test ENV #1 - ncp3 by AWS ECS
Test ENV #4 #2 - ncp4 by AWS ECS
Database: PostgreSQL by AWS RDS
Queue Manager: Kafka by AWS MSK
Environment
Use the default UChicago dataset - 27M records
Other datasets and their sizes: Check with P.Os, depending on the workflow to test.
Run two environments - 1 with a profiler and the other one withOUT a profiler.
Test development
Determine how usage is likely to vary amongst end users and identify key scenarios to test for all possible use cases. It is necessary to simulate a variety of end users, plan performance test data and outline what metrics will be gathered.
In the implementation phase, performance test cases are ordered into performance test procedures. These performance test procedures should reflect the steps normally taken by the user and other functional activities that are to be covered during performance testing. A test implementation activity is establishing and/or resetting the test environment before each test execution. Since performance testing is typically data-driven, a process is needed to establish test data that is representative of actual production data in volume and type so that production use can be simulated.
...
Types of Performance testing
| Type | Mandatory/Optional | Description |
|---|---|---|
| Smoke Test aka Health check | M | Should be performed every time when the functionality of the application and the script need to be checked. Also, it can be used as a warming-up test before the main testing step. The result of this testing is used to decide if a build is stable enough to proceed with further testing |
| Fixed Load Test | M | Load testing is testing that checks how systems function under a heavy number of concurrent virtual users performing transactions over a certain period. A load test is a kind of the most regular test to check the benchmark of the application and its components. Could be run with the load that is defined in NFRs/SLAs |
| Benchmark Testing | M | Benchmark Testing is defined as a software testing type, done to give a repeatable set of quantifiable results from which present and future software releases for specific functionality can be baselined or compared. It’s a process used to compare the performance of software or hardware system also known as SUT (System Under Test) |
| Capacity Testing | O | Should be performed to find the number of virtual users which the application supports in a stable state. The test can be performed as one of the first main tests and, also, should be performed after significant changes in the application or its configuration. While the increasing business and adding users, the team should be aware of the system capacity so that the user experience is not impacted while meeting the growth objective. |
| Stress testing | O | Under stress testing, various activities to overload the existing resources with excess jobs are carried out to break the system down. The goal of stress testing is to analyze post-crash reports to define the behaviour of the application after failure. The biggest challenge is to ensure that the system does not compromise the security of sensitive data after the failure. In a successful stress testing, the system will come back to normality along with all its components even after the most terrible breakdown. Stress testing is supposed to run occasionally to check the application’s stability under high load. Can be performed close to after the code is complete or by special request. Stress testing has next sub-types:
be applied. The main goal of that type of test is to check the behaviour of the application on avoiding crushing under a huge number of requests (usually, without delay between them).
aims to verify that a system is efficiently handling extra resources like additional CPU or servers during a failure. |
| Scalability testing | O | Scalability testing is non-functional testing, that measures the performance of a network or system when the number of user requests is scaled up or down. The purpose of Scalability testing is to ensure that an application can handle the projected increase in user traffic, data volume, transaction counts frequency, etc. It tests the system, processes, and database's ability to meet a growing need. Scalability testing lets you determine how your application scales with the increasing workload. |
| Volume testing | O? | Where the software is subjected to a huge volume of data. It is also referred to as flood testing. Volume testing is done to analyze the system performance by increasing the volume of data in the database. The objective of performing the volume testing is to check system performance with increasing volumes of data in the database and to identify the problem that is likely to occur with a large amount of data. |
| Endurance testing | O? | The ability of a software product to continue to function, over a long period of time, exercising its full range of use, without failing or causing failure. The purpose of Stability Testing is to check if the application will crash at any point in time. |
Test execution
Test execution occurs when the performance test is conducted, often by using performance test tools. Test results are evaluated to determine if the system’s performance meets the requirements and other stated objectives. Any defects are reported.
Detailed information about workflow performance testing executions is described Steps for testing process.
Requested performance testing
The ticket contains all clear, understandable requirements and acceptance criteria.
The ticket should be prioritized by PTF Team PO.
Implementation of the ticket is going through PTLC.
Finally, the report should be shared with interested stakeholders.
Release performance testing
Regression benchmark testing for a new release contains results of a current release candidate and a comparison with the previous release.
The regression pack contains all necessary modules' or workflows' coverages.
The regression pack is an automated process.
TBD
System tuning
Consolidate, analyze and share test results. Then fine tune and test again to see if there is an improvement or decrease in performance. Since improvements generally grow smaller with each retest, stop when bottlenecking is caused by the CPU. Then you may have the consider option of increasing CPU power.
Test result reporting
For analysis results of Server-side Performance Testing should be used following metrics:
- Application metrics:
| Metric | Aggregation |
|---|
| Comments |
|---|
| Active Thread (VUsers) | M | Count | |
Response time | M | Average, median, 95 percentile Optionally: Minimum, Maximum, Std. Dev | |
| Throughput (Transaction/sec) | M | Count | |
| Hits/sec | O | Count | |
Response status code | O | Assertions | |
| Failure rate | M |
Active Thread (VUsers)
Response time
Hits/s
Error/request
Response code
CPU metrics
Memory metrics
Disk metrics
...
| % Count | |||
| DB locks | M | Count | |
| DB TOP waits | M | List | |
| TBD |
- System metrics:
| Metric | Aggregation | Comments | |
|---|---|---|---|
| CPU used | % | ||
| Memory used | % | ||
| DB CPU used | % | ||
| DB Memory used | % |
In some cases, new metrics will be introduced to cover missing areas (.NET metrics, Database metrics, etc).
PreTest
- Establishing test scenarios and conditions, and SLA with POs, especially for the scenarios that we come up with.
- Maintaining a test log - write down time of tests execution and conditions (see the attachment for sample logs)
- parameters:
- dataset name or the number of records in the database
- log level of all modules and/or a specific module
- FOLIO version and/or specific modules versions
- With or Without profiler
- Number of users
- Duration
- Other configurations or settings (TBD)
- parameters:
- Feasible to restart the cluster so that all the ECS services have a fresh starting point in terms of CPU and memory?
- Short duration tests, no need to restart environment every time
- Keep an eye on env's metrics such as CPU and memory utilization, may need to take proactive action to restart the module or the whole env if the metrics reach a critical level.
- Long-duration tests, need to restart the environment to have a clean starting point.
- Short duration tests, no need to restart environment every time
- Baseline tests/results:
- Only when absolutely required? E.g., a whole new set of workflow
- Each time adding a new version of a module
- If parameters haven't changed, then don't need to rerun the baseline.
- pgHero is a tool that captures slow queries. Clear out pgHero if it has not been cleared already.
- Run a smoke test to verify that there are no functional errors or that the environment has been set up successfully
- Longevity tests
- Take a heap dump
- Triple-check the Jenkins job's parameters
- If the environment has been restarted, make sure that all ECS services are stable for at least 15 minutes
During test:
- Capture any observations.
- Capturing heap dumps, esp. for longevity tests - manual process at the moment, maybe automated in the future. At a minimum: the beginning, middle, and end of the test run.
Post Test:
- Data collection - what pieces of data are important to collect
- Average response time (Obtained from Grafana)
- Errors (thresholds for failing an API call (Obtained from Grafana))
- Modules logs to see if any errors entries
- TPS - transactions per second
- CPU utilization for a particular module or for any abnormal behaviour observed (from any module)
- Memory usage for a particular module or for any abnormal behaviour observed (from any module)
- Updating test log
- With the observations above, any anomalies
- Update the timestamps or a Grafana URL so that we can go back and look at the graphs later
- Capture PgHero stats
- Save-As from browser
- If running a series of tests, don't wait until the end of the runs to look at the data. Check the data after each run to make sure nothing is questionable and if there were, we can address them right away.
- Write report
View file
WIKI Space: [Reporting] Performance Testing Reports